Views:1 Author:Site Editor Publish Time: 2021-07-19 Origin:Site
1. Brief description of cement mixer:
It is a whole car. Sub-mixer. Pressure device. Intelligent controller. The inside of the motor body is also a cylindrical body with two thin ends and a thick middle. There are also some clockwise fan blades, which are transported from the mercury station to the construction site. During the time, due to the continuous rotation of the fan blades of the tank body, it has the effect of preventing cement from solidifying.
2. Description of special performance of cement mixer truck
1. The mixing drum and blades are made of special wear-resistant steel plates produced by Wuhan Iron and Steel Co., Ltd.
2. The blades of the mixing drum are made by special stamping and forming.
3. The tank body butt joint and blade welding adopt large-scale rotary tooling with high precision.
4. The hydraulic system adopts all imported components, with compact structure and excellent performance.
5. The whole vehicle has unique and beautiful appearance, compact and reasonable structure.
6. The operating system is flexible, convenient and fast, realizing the three-in-one operation of the left and right and the feed port.
7. After the tank body is welded, the shot blasting pretreatment process is adopted to achieve rust removal and rust prevention.
3. Cement mixer operation instructions:
1. Before the concrete mixer truck works, it must be checked to confirm that the steering, braking, lighting, and signal systems are sensitive and effective. The roller and chute of the mixer truck are free of cracks and serious damage. The mixing blades are worn within the normal range. The chassis and subframe The U-shaped bolts are well connected.
2. Understand the construction requirements and site conditions. Choose the driving route and parking place.
3. Traffic rules must be obeyed when driving on social roads. The turning radius should meet the requirements of the instruction manual, and the speed should not exceed 15km per hour. The pitting speed is not more than 5km per hour.
4. During operation, it is strictly forbidden to touch the rotating rollers and wheels by hand.
5. When the concrete mixer truck is reversing and unloading, you must obey the command, pay attention to the surrounding personnel, and stop immediately if it is abnormal.
6. It is strictly forbidden to clean the concrete mixer truck under the high-voltage line.
The composition of the cement mixer
It is composed of automobile chassis, mixing drum, transmission system, water supply device and other parts. Due to technical bottlenecks, the four major parts of domestic mixer trucks are all imported parts.
Mixer truck composition: second-class chassis, drive train, hydraulic system, frame, mixing tank, feeding and discharging device, water supply system, control system, human ladder and other parts. The front end of the mixing tank is connected with the reducer and installed on the front of the frame, and the back end is supported by two supporting wheels installed on the back of the frame through a raceway.